Abrasive Finishing, Inc.  
11770 Dexter-Chelsea Rd
Chelsea, MI 48118
Ph: 734.475.9111
Fax: 734.475.3300
Abrasive Finishing, Inc. Email Abrasive Finishing
About Abrasive Finishing
Burr Bench Common Parts
Made to Order Media
Ceramic Media MSDS

Shop for Deburring Machines & Parts

BB15f Filtration System

BB15f Burr Bench Filtration System

 

Unit: 12" high x 12" wide x 24" long
(also available in 10" h x 10" w x 14" l)

Power: 110 Volt Drive Motor

BB15f Filtration System
SQ4616 wtih BB15f Filtration System

The BB15f is a fifteen gallon capacity filtration system for use with all Burr Bench vibratory finishing equipment. It utilizes a filter sock to remove the effluent from the water before it goes into the tank. It is used externally from the Burr Bench to provide a much longer time of operation before cleaning the tank is necessary.

The standard Burr Bench recirculation tank requires cleaning every eight hours of operation. The BB15f has a fifteen gallon capacity and will require much less cleaning and will be easier to do. The tank is plastic to eliminate any rust problems.

The Burr Bench vibratory finisher drain hose goes into the BB15f filter sock. The sock can be cleaned and reused, or replaced, when it is full; thus keeping effluent out of the tank.

The recirculation pump is isolated from the effluent, preventing damage to the pump. When emptying the tank, the pump can be used to pump out the water by changing the control valve.

Standard filter sock is 10 micron and a 5 micron is available. Dimensions are: 24 inches by 12 inches by 12 inches.

Also available in a conveniently sized six gallon capacity. This unit takes up less floor space and is easier to move around if needed. Measures 14 in. L X 10 in.W X 10 in. H.

 

 

© 2010-2022, Abrasive Finishing, Inc.